Skip to content

Atosa WA300001 Gas Hose Kit, 3/4" x 48", Quick Disconnect, Gas Valve, Restraining Cable, for Natural Gas and Propane Equipment

Atosa WA300001 Gas Hose Kit, 3/4" x 48", Quick Disconnect, Gas Valve, Restraining Cable, for Natural Gas and Propane Equipment

The Atosa WA300001 is a complete gas hose kit with a 3/4" x 48" stainless steel gas connector. It comes with a quick disconnect, a gas valve, a restraining cable kit and two 90° elbows. It is made for stationary and caster-mounted commercial kitchen equipment.

At a Glance

  • Hose: 3/4" inside diameter x 48" long
  • Capacity: 180,000 BTU per hour
  • Hose build: stainless steel corrugated tubing, stainless steel radial wrap, green antimicrobial PVC coating
  • In the kit: gas connector, quick disconnect, gas valve, restraining cable kit, two 90° elbows
  • Certification: CSA (US and Canada)

A Gas Appliance Connector for Equipment You Move

This gas appliance connector is built for equipment you move for cleaning. The ends rotate, which makes it easier to install and reduces strain on the hose. The restraining cable keeps the hose from being pulled too far.

What Is in the Kit

Part What it does
Gas connector Made for moveable, caster-mounted kitchen equipment
Quick disconnect Disconnects the gas hose so you can move equipment for cleaning and maintenance
Gas valve For manual shutoff within 6 ft. of the appliance, which the sheet says code requires
Restraining cable kit Keeps the hose from being pulled too far. Mounting hardware included
90° elbows (2) Give you more ways to route the hose during installation

Features

  • Ends rotate for simple installation and less strain on the hose
  • Heavy duty stainless steel corrugated tubing, flexible for easy installation
  • Heavy duty stainless steel radial wrap keeps the hose from stretching
  • Green PVC coating with an antimicrobial agent, for easy cleaning
  • Welded construction for added durability

Other sizes: BK Resources 3/4" x 48" Kit #3, 1/2" x 48", 1" x 48".

Shop all commercial gas hoses, or browse Atosa parts.

Specifications

Spec Detail
Model WA300001
Hose inside diameter 3/4"
Hose length 48"
Capacity 180,000 BTU per hour
Tubing Stainless steel, corrugated
Wrap Stainless steel radial wrap
Coating Green PVC with antimicrobial agent
Ends Rotate
Construction Welded
In the kit Gas connector, quick disconnect, gas valve, restraining cable kit with mounting hardware, two 90° elbows
Quick disconnect standard ANSI Z21.41 / CSA 6.9
Connector standard ANSI Z21.69 / CSA 6.16
Certification CSA (US and Canada)

Before You Order

  • The sheet says restraining kits are required by law for all moveable gas equipment. Keep the cable connected.
  • The gas valve is for manual shutoff within 6 ft. of the appliance.
  • Have a qualified gas installer do the installation.
  • Need a different size? See the BK Resources Kit #3 gas hose kits in 1/2", 3/4" and 1" sizes.

Atosa WA300001 FAQ

What comes in the Atosa WA300001?

A 3/4" x 48" gas connector, a quick disconnect, a gas valve, a restraining cable kit with mounting hardware, and two 90° elbows.

How many BTUs can the WA300001 handle?

180,000 BTU per hour for the 3/4" x 48" size.

What is the hose made of?

Stainless steel corrugated tubing with a stainless steel radial wrap and a green antimicrobial PVC coating. It has welded construction.

Is the WA300001 for equipment on casters?

Yes. It is made for stationary and caster-mounted commercial kitchen equipment, including equipment you move for cleaning.

Do I need the restraining cable?

Yes. The spec sheet says restraining kits are required by law for all moveable gas equipment.

Where does the gas valve go?

It allows manual shutoff within 6 ft. of the appliance.

Is it CSA certified?

Yes. The quick disconnect meets ANSI Z21.41 / CSA 6.9, and the connector meets ANSI Z21.69 / CSA 6.16.

The Atosa WA300001 is a 3/4" x 48" gas hose kit for movable commercial gas equipment, rated at 180,000 BTU per hour. It comes with the gas connector, a quick disconnect, a gas valve, a restraining cable kit with mounting hardware and two 90° elbows, so a caster-mounted fryer can be connected, rolled out for cleaning and reconnected.

Does It Fit My Fryer?

Every ATFS gas floor fryer on this site has a 3/4" NPT gas connection at the rear, the same size as this hose. The hose is rated at 180,000 BTU per hour, which is above the listed input of every ATFS model:

FryerNatural gasPropane
ATFS-35ES60,000 BTU60,000 BTU
ATFS-40102,000 BTU90,000 BTU
ATFS-50136,000 BTU120,000 BTU
ATFS-75170,000 BTU150,000 BTU

Your gas installer should still confirm the hose against your gas pressure, the length of the run and any other equipment on the same supply.

How It Is Built

The hose is corrugated stainless steel tubing with a stainless steel radial wrap and a green PVC coating with an antimicrobial agent. The ends rotate, and the construction is welded. The quick disconnect meets ANSI Z21.41 / CSA 6.9, and the connector meets ANSI Z21.69 / CSA 6.16.

Why the Restraining Cable Matters

Atosa's sheet says restraining kits are required by law for all movable gas equipment. The cable limits how far the fryer can roll, so the hose is not pulled when the fryer moves. Keep it connected whenever the fryer is hooked up. The gas valve is for manual shutoff within 6 ft. of the appliance.

Why a Flexible Hose and Quick Disconnect

Floor fryers sit on casters so they can be rolled out for cleaning behind and under them. A rigid gas pipe would make that impossible. The WA300001 gives the fryer a flexible connection, and the quick disconnect lets staff unhook the gas without tools, while the shut-off valve closes the supply first.

Rolling the Fryer Out for Cleaning

  1. Turn the fryer off and let the oil cool fully.
  2. Close the gas shut-off valve.
  3. Release the quick disconnect.
  4. Roll the fryer out only as far as the restraining cable allows, and clean behind and under it.
  5. Roll it back, reconnect the quick disconnect, open the valve and relight the pilot following the fryer manual.

Inspecting the Hose

Check the hose regularly for kinks, crushing, worn coating, or damage near the fittings. Do not let it rest on the floor, against hot surfaces or near the flue. If you smell gas, close the valve and call a qualified gas technician. Replace a damaged hose rather than repairing it.

Installation

  • Measure from the gas outlet to the fryer's gas inlet. The 48" hose should reach without stretching, kinking or sharp bends, and stay off the floor.
  • Fasten the restraining cable to the wall and the fryer, and keep it connected. It stops the fryer from rolling far enough to strain the hose.
  • Keep the hose away from the fryer's hot surfaces and flue.
  • Have a qualified gas installer make the connection and leak test it, and confirm it meets local code.

WA300001 or BK Resources?

Atosa WA300001BK Resources BKG-GHC-7548-SCK3
Size3/4" x 48"3/4" x 48"
Rated capacity180,000 BTU per hour184,000 BTU per hour (with shut-off valve and quick connect)
In the kitGas connector, quick disconnect, gas valve, restraining cable kit, two 90° elbowsGas hose, quick disconnect, shut-off ball valve, two 90° female elbows, restraining cable and hardware
CertificationCSA (US and Canada)CSA (US and Canada), Massachusetts approved

Both kits are 3/4" x 48" and both cover every ATFS model. Choose the WA300001 for an all-Atosa setup, or the BK kit for its 5 year hose warranty and Massachusetts approval.

Common Questions

Can I install it myself?

Have a qualified gas installer make the connection, leak test it and confirm it meets local code.

What if 48 inches is too short or too long?

Measure from the gas outlet to the fryer inlet first. The hose should reach without stretching, kinking or lying on the floor. Ask your installer if another length fits your run better.

Do I need the restraining cable?

Yes. It keeps a caster-mounted fryer from rolling far enough to pull on the hose, and the Atosa sheet says restraining kits are required by law for movable gas equipment.

To see the current price and order, use the "See Price & Buy at The Restaurant Warehouse" button above. Questions about fit or setup? Call or text (206) 419-5801.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare