Skip to content

Atosa ATFS-35ES-LP 16-Inch 35 lb ENERGY STAR Propane Deep Fryer, 60,000 BTU, 3 Burners

Atosa ATFS-35ES-LP 16-Inch 35 lb ENERGY STAR Propane Deep Fryer, 60,000 BTU, 3 Burners

The Atosa ATFS-35ES-LP is a 15-3/5" wide floor model fryer for propane that holds 35 lb of oil. It has 3 burners with 60,000 BTU in total and holds 200°F to 400°F. It is ENERGY STAR certified.

At a Glance

  • Size: 15-3/5" W x 30-1/10" D x 44-2/5" H
  • Oil capacity: 35 lb
  • Gas: propane, 3 burners, 60,000 BTU total
  • Temperature: 200°F to 400°F, millivolt thermostat
  • Baskets: two (2) nickel plated baskets with coated handles, basket hanger
  • Mobility: four (4) casters standard
  • Certifications: cETLus, ETL-Sanitation, ENERGY STAR
  • Warranty: 1 year parts and labor

Most units ship within one business day from our warehouse with free freight to the lower 48.

An ENERGY STAR Propane Fryer

This ENERGY STAR propane fryer has three burners and 60,000 BTU in total. It holds up to 35 lb of oil, keeps oil at 200°F to 400°F, and rolls on four casters.

Is the ATFS-35ES-LP the Right Size for Your Line?

The ATFS-35ES-LP holds 35 lb of oil over 3 burners at 20,000 BTU each, 60,000 BTU in total. That works out to about 1,710 BTU per pound of oil. The 35ES is the ENERGY STAR model, with the lowest gas input in the line.

This 133 lb propane fryer fits a 15-3/5" x 30-1/10" spot and stands 44-2/5" tall, matching the ATFS-40 and ATFS-50 cabinets.

Need more than 60,000 BTU? Step up to the ATFS-40-LP: 90,000 BTU and 40 lb of oil in the same cabinet size, without the ENERGY STAR rating. Running on natural gas instead? The ATFS-35ES-NG has the same 60,000 BTU, with a 4" W.C. regulator instead of 10" W.C.

Good For

  • Propane kitchens that want ENERGY STAR: the only ENERGY STAR ATFS, on propane
  • Cafés and small bars on propane: fries and appetizers from 35 lb of oil
  • A dedicated vat: one menu item, such as gluten-free fries, in its own fryer
  • Diners and grills: fried sides at 60,000 BTU
  • Kitchens without a natural gas line: runs on propane

Built for Daily Commercial Use

  • Stainless steel exterior and interior
  • Welded stainless steel tank
  • Heavy duty burners with a standing flame and standby pilots
  • Millivolt thermostat that holds the temperature you set, from 200°F to 400°F
  • Oil cooling zone in the bottom of the tank catches food bits and helps oil last longer
  • Safety valve with an automatic voltage stabilizing function
  • Self-reset high temperature limit
  • Two (2) nickel plated baskets with coated handles and a basket hanger
  • 3/4" NPT rear gas connection and regulator
  • Four (4) casters standard
  • ENERGY STAR certified

Pick the Right Fryer

Model Gas Oil Burners Total BTU Width
ATFS-35ES-NG Natural gas 35 lb 3 60,000 15-3/5"
ATFS-35ES-LP (this model) Propane 35 lb 3 60,000 15-3/5"
ATFS-40-NG Natural gas 40 lb 3 102,000 15-3/5"
ATFS-40-LP Propane 40 lb 3 90,000 15-3/5"
ATFS-50-NG Natural gas 50 lb 4 136,000 15-3/5"
ATFS-50-LP Propane 50 lb 4 120,000 15-3/5"
ATFS-75-NG Natural gas 75 lb 5 170,000 21-1/10"
ATFS-75-LP Propane 75 lb 5 150,000 21-1/10"

Need natural gas? See the Atosa ATFS-35ES-NG, the same fryer for natural gas.

Optional accessories: fryer cover 21201001019, splash guard 21101001047, joiner strip 21101001046, mesh fryer screen R06018000069 and leg kit 301110006.

Shop all commercial deep fryers, including propane and ENERGY STAR models.

Specifications

Spec Detail
Configuration Floor model propane deep fryer
Oil capacity 35 lb
Gas type Propane (LP)
Burners 3, independent manual control
BTU per burner 20,000
Total BTU 60,000
Gas pressure (regulator) 10" W.C.
Gas connection 3/4" NPT, rear, with regulator
Temperature range 200°F to 400°F
Thermostat Millivolt
Safety Self-reset high temperature limit; safety valve with automatic voltage stabilizing
Baskets (2) nickel plated, coated handles
Basket size 13-3/10" x 6-1/2" x 5-9/10"
Cooling zone Yes, bottom of tank
Construction Stainless steel exterior, interior and welded tank
Casters (4) standard; leg kit 301110006 optional
Exterior dimensions 15-3/5" W x 30-1/10" D x 44-2/5" H
Net weight 133 lb
Shipping weight 166 lb
Warranty 1 year parts and labor
Certifications cETLus, ETL-Sanitation, ENERGY STAR; conforms to NSF/ANSI 4 and ANSI Z83.11b; certified to CSA 1.8b

Before You Order

  • This is the propane model. Order the ATFS-35ES-NG for natural gas.
  • Gas: 3/4" NPT rear connection with a regulator. Atosa sets it at 10" W.C. for propane.
  • Check your space: the ATFS-35ES-LP is 15-3/5" wide, 30-1/10" deep and 44-2/5" tall, and weighs 133 lb.

Atosa ATFS-35ES-LP FAQ

What size is the Atosa ATFS-35ES-LP?

The ATFS-35ES-LP is 15-3/5" wide, 30-1/10" deep and 44-2/5" tall. It weighs 133 lb (166 lb shipping weight).

How much oil does the ATFS-35ES-LP hold?

35 lb.

How many BTU is the ATFS-35ES-LP?

60,000 BTU total: 3 burners at 20,000 BTU each, on propane.

What temperature range does the ATFS-35ES-LP have?

200°F to 400°F, with a millivolt thermostat that holds the temperature you set.

What gas connection does the ATFS-35ES-LP need?

A 3/4" NPT rear connection. It has a regulator set at 10" W.C. for propane.

Does the ATFS-35ES-LP come with baskets?

Yes, two. Each nickel plated basket measures 13-3/10" x 6-1/2" x 5-9/10" and has a coated handle, and a basket hanger is included.

Does the ATFS-35ES-LP have legs or casters?

Four casters come standard, which makes the 133 lb propane fryer easier to move. Prefer legs? Add the optional 301110006 leg kit.

What certifications does the ATFS-35ES-LP have?

cETLus, ETL-Sanitation and ENERGY STAR; conforms to NSF/ANSI 4 and ANSI Z83.11b; certified to CSA 1.8b. It is the only ENERGY STAR fryer in the ATFS line.

What warranty comes with the ATFS-35ES-LP?

1 year parts and labor. Genuine ATFS-35ES replacement parts are listed in the parts section on this page.

Should I choose the ATFS-35ES-LP or the ATFS-40-LP?

Choose the ATFS-35ES-LP if you want an ENERGY STAR fryer: it holds 35 lb of oil on 60,000 BTU. The ATFS-40-LP is the same 15-3/5" width with 5 lb more oil and 90,000 BTU, but it is not ENERGY STAR rated.

What is the difference between the ATFS-35ES-LP and the ATFS-35ES-NG?

Gas type and regulator. The ATFS-35ES-LP runs on propane with a 10" W.C. regulator; the ATFS-35ES-NG runs on natural gas at 4" W.C. Both are 60,000 BTU ENERGY STAR fryers with 35 lb of oil.

Spec Sheet

Download the Atosa ATFS-35ES-LP spec sheet (PDF, Rev. 07/25)

ATFS-35ES Parts & Service

For OEM replacement parts for the ATFS-35ES, see the ATFS-35ES parts list, with part numbers and quantities from Atosa's exploded-view diagram. Parts lists for every model are on the Atosa parts lists index.

The Atosa ATFS-35ES-LP is a 35 lb propane floor fryer with 3 burners and 60,000 BTU of total input, and it is the only ATFS model that is ENERGY STAR certified. It is 15-3/5" wide, 30-1/10" deep and 44-2/5" tall, rolls on four casters, and comes with two nickel plated baskets. Pick it over the 40 when efficiency matters more than raw heat: in the same footprint, the 35ES runs on about 40 percent less burner input.

Where the ATFS-35ES Fits in the ATFS Line

Atosa makes the ATFS in four sizes: 35, 40, 50 and 75 lb. The 35ES is the smallest and the only one built to ENERGY STAR. All three burners are rated at 20,000 BTU each, for 60,000 BTU in total, compared with 90,000 BTU on the ATFS-40-LP. The ENERGY STAR program rates fryers for efficiency, so the 35ES is aimed at kitchens that want to use less gas per pound of food.

Choose the 35ES when your volume fits 35 lb of oil, or when you want a dedicated vat for one item, such as gluten-free fries or fish, next to a bigger fryer. If you need more oil or more heat in the same 15-3/5" width, step up to the ATFS-40-LP or the ATFS-50-LP.

Sizing the ATFS-35ES to Your Volume

Atosa does not publish an hourly production rating. Using the common estimate of 1.5 to 2 times oil capacity per hour, a 35 lb fryer lands around 52 to 70 lb of food per hour at best.

The bigger factor on this model is heat. Three 20,000 BTU burners give it about 1,710 BTU per pound of oil, the lowest in the ATFS line (the ATFS-40-LP runs about 2,250). In practice that means the 35ES is happiest with steady, moderate drops rather than full baskets of frozen product stacked back to back. If your busiest hour runs past about 50 lb of fried food, or the rush is mostly frozen fries and wings, the 40 gives you more heat in the same 15-3/5" width.

This Is the Propane Model

The ATFS-35ES-LP is built for propane only. Each ATFS size comes as a separate natural gas model and a separate propane model, with different burner nozzles and regulator settings. On this model Atosa sets the regulator at 10" W.C. If your kitchen runs on natural gas, order the ATFS-35ES-NG instead.

Both versions of the 35ES are rated at 60,000 BTU, with three 20,000 BTU burners.

Propane kitchens need a supply that can keep up with the fryer and any other propane equipment on the same line. Your propane supplier or gas installer should confirm the tank, regulator and line size for the total BTU you will run.

Space, Clearance and Height

The ATFS-35ES-LP is 15-3/5" wide, 30-1/10" deep and 44-2/5" tall, and weighs 133 lb (166 lb shipping). Atosa's manual says to leave at least 6" of clearance on both sides and the back. That means planning about 27-3/5" of width and 36-1/10" of depth for the ATFS-35ES. The fryer must go under a ventilation hood that meets your local code, and it is not for outdoor use.

It comes with four casters as standard, so you can roll it out for cleaning. Atosa also lists an optional leg kit, 301110006, if you would rather stand it on legs. Because it rolls, connect it with a flexible gas hose kit that includes a restraining cable (see the gas hookup section below).

Baskets and Tank

The ATFS-35ES comes with two nickel plated baskets, 13-3/10" x 6-1/2" x 5-9/10", with coated handles, plus a basket hanger. The 75 lb ATFS uses wider 9-1/2" baskets. On this size you get the 6-1/2" basket, the same as the other 15-3/5" models, so baskets interchange across a line of 35, 40 and 50 lb fryers.

The tank is welded stainless steel with a cool zone at the bottom. Crumbs and breading settle into the cool zone, below the hottest oil, which helps slow how fast they burn and darken the oil. Temperature runs from 200°F to 400°F on a millivolt thermostat, with a self-reset high temperature limit.

Filtering the Oil

For a 35 lb fryer, the Atosa FPOF-50 portable filter holds a full drain: it takes up to 50 lb of oil. It rolls under the fryer drain, filters the oil and pumps it back through a 5' high temperature hose. It uses FP-1324-5 filter paper, 13-1/2" x 24", 100 sheets per box.

If you run several fryers, or plan to add a 75 lb fryer later, the larger FPOF-80 holds 80 lb and uses FP-1728-5 paper.

Filtering often, many kitchens do it daily at close, removes crumbs before they burn and keeps the oil usable longer. Always follow the filter and fryer manuals for safe draining temperatures.

Gas Hookup

The ATFS-35ES-LP has a 3/4" NPT gas connection at the rear, with the regulator. Both 3/4" x 48" hose kits on this site fit that connection size, and both are rated above this fryer's 60,000 BTU:

  • Atosa WA300001: 180,000 BTU per hour, with a quick disconnect, gas valve, restraining cable kit and two 90° elbows.
  • BK Resources BKG-GHC-7548-SCK3: 184,000 BTU per hour as BK rates it with the shut-off valve and quick connect, with a 5 year warranty on the hose.

Measure from the gas outlet to the fryer's gas inlet before you order, so the 48" hose reaches without stretching or sharp bends. Keep the restraining cable connected. Have a qualified gas installer make the connection, check for leaks and confirm the setup meets local code.

Cleaning and Care

Before first use, wipe the fryer with a mild detergent. Boil out the tank when buildup appears and whenever you change the oil. Fill it with water and detergent below the oil line, heat, soak, then drain and rinse. Atosa ATTAB1 boil-out tablets are low foam and made for this job. Do not use a wire brush on the tank, and never hose down or pressure wash the fryer.

Atosa says to have the flue cleaned every 3 to 6 months. The fryer has a 1 year parts and labor warranty.

Menu Fit: What the ATFS-35ES Fries Well

The 35 lb tank suits lighter, steady frying: fries, onion rings, appetizers and fried sides. Many kitchens use a 35ES as a dedicated fryer for one item that should stay separate, such as gluten-free fries or fish, so flavors and allergens do not cross into the main oil.

FoodTypical starting temperature
Frozen fries350°F
Fresh-cut friesBlanch at 300-325°F, finish at 350-375°F
Wings350-375°F
Breaded bone-in chicken325-350°F
Fish fillets and shrimp350-375°F
Tortilla chips and taco shells350°F
Frozen appetizers350°F

These are common kitchen starting points, not Atosa settings. Follow the directions from your food supplier and your local food safety rules for internal temperatures.

The ATFS thermostat runs from 200°F to 400°F, which covers all of these.

Planning the Fry Line Around the ATFS-35ES

Kitchens often weigh one large fryer against two smaller ones. Here is how the ATFS-35ES compares, using Atosa's listed widths and oil capacities:

OptionTotal widthTotal oil
two ATFS-35ES fryers31-1/5"70 lb
an ATFS-7521-1/10"75 lb

Two 35ES fryers cost more floor width but give you two separate oils and ENERGY STAR on both. Widths do not include the 6" side clearance Atosa calls for, so add that to any plan.

Setting Up on Day One

  1. Check the data plate: this unit is built for propane. Do not connect it to the other gas type.
  2. Roll it into place under the hood, level it, and keep the 6" clearance on the sides and back.
  3. Have a qualified installer connect a 3/4" flexible hose kit with the restraining cable, then leak test every joint.
  4. Wipe the tank and fryer with a mild detergent, rinse and dry fully, as the Atosa manual says before first use.
  5. Fill the tank to the oil line with 35 lb of oil before lighting. Never heat an empty tank.
  6. Light the pilot following the lighting steps in the manual, then set the thermostat and let the oil come up to temperature before the first drop.

Running the 35ES as a Dedicated Vat

A lot of 35ES fryers end up beside a bigger fryer, holding oil for one job: gluten-free fries, fish, or a sweet item like churros. Keeping that item in its own tank protects the flavor of your main oil and keeps allergens out of it.

  • Each change is only 35 lb of oil, so a dedicated vat can run on its own change schedule without tying it to the main fryer.
  • Label the vat for its one use so the line does not drop the wrong product in it.
  • The FPOF-50 takes a full 35 lb drain with room to spare, and one filter can serve both this fryer and a 40 or 50 beside it.
  • Skim crumbs between drops and season away from the oil.

Change the oil when it turns dark, smokes at normal frying temperature, foams heavily, or tastes off. Boil out with ATTAB1 tablets at each change.

What a Complete ATFS-35ES Setup Includes

  • The fryer, in the propane version.
  • A 3/4" gas hose kit with restraining cable: Atosa WA300001 or BK Resources BKG-GHC-7548-SCK3.
  • A portable filter sized for 35 lb of oil: the FPOF-50.
  • Filter paper for that filter: FP-1324-5.
  • ATTAB1 boil-out tablets for tank cleaning.
  • 35 lb of frying oil for the first fill, plus a spare fill on the shelf.

Before You Order

  • Gas type: this is the propane model. For natural gas, order the ATFS-35ES-NG.
  • Space: 15-3/5" wide plus 6" on each side and the back, about 27-3/5" x 36-1/10".
  • Hood: the fryer must sit under a hood that meets your local code.
  • Gas hose: a 3/4" flexible hose kit with a restraining cable, sized to your run.
  • Filter: the FPOF-50 with FP-1324-5 paper.
  • Boil-out: ATTAB1 tablets for tank cleaning.

Common Questions

Can I convert the ATFS-35ES-LP to natural gas?

Order the ATFS-35ES-NG for natural gas. Each model has its own burner nozzles and regulator setting. If you need to change gas type later, ask a qualified technician and Atosa about the correct parts and procedure.

What does ENERGY STAR mean for this fryer?

The 35ES is certified under the ENERGY STAR program, which rates commercial fryers for efficiency. It is the only model in the ATFS line with that certification.

Is the 35ES enough as my only fryer?

For a light fry menu, yes. If fried food is a big part of the ticket, most kitchens are better served by the ATFS-40-LP or ATFS-50-LP, with the 35ES added later as a dedicated vat.

Do the 35ES baskets fit my other ATFS fryers?

The 35ES uses the 13-3/10" x 6-1/2" basket, the same size as the ATFS-40 and ATFS-50, so baskets swap across those three. The ATFS-75 uses a wider 9-1/2" basket.

How much oil does the ATFS-35ES take?

Atosa rates the tank at 35 lb. Fill to the oil line marked in the tank, and keep a spare fill on hand.

Do I need a hood?

Commercial gas fryers are normally installed under a ventilation hood with fire suppression. Your local code official and hood installer set the exact requirements.

To see the current price and order, use the "See Price & Buy at The Restaurant Warehouse" button above. Questions about sizing or gas setup? Call or text (206) 419-5801.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare